Cricut, Inc. (NASDAQ:CRCT) Q3 2023 Earnings Call Transcript

Cricut, Inc. (NASDAQ:CRCT) Q3 2023 Earnings Call Transcript November 7, 2023

Operator: Good day and thank you for standing by. Welcome to the Cricut Quarter Three Earnings Conference Call. At this time, all participants are in a listen-only mode. After the speakers’ presentation, there will be a question-and-answer session. [Operator Instructions] Please be advised that today’s conference is being recorded. I would now like to hand the conference over to your speaker today, Jim Suva, Senior Vice President of Finance. Jim, please go ahead.

Jim Suva: Thank you, Operator, and good afternoon, everyone. Thank you for joining us on Cricut’s third quarter 2023 earnings call. Please note that today’s call is being webcast and recorded on the Investor Relations section of the company’s website. A replay of the webcast will also be available following today’s call. For your reference, accompanying slides used on today’s call, along with a supplemental data sheet, have been posted to the Investor Relations section of the company’s website, investor.cricut.com. Joining me on the call today are Ashish Arora, Chief Executive Officer; and Kimball Shill, Chief Financial Officer. Today’s prepared remarks have been recorded after which Ashish and Kimball will host live Q&A.

Lukiyanova Natalia frenta/Shutterstock.com

Before we begin, we would like to remind everyone that our prepared remarks contain forward-looking statements and management may make additional forward-looking statements, including statements regarding our strategies, business, expenses and results of operations, in response to your questions. These statements do not guarantee future performance, and therefore, undue reliance should not be placed upon them. These statements are based on current expectations of the company’s management and involve inherent risks and uncertainties, including those identified in the Risk Factors section of Cricut’s most-recently filed Form 10-Q. Actual events or results could differ materially. This call also contains time-sensitive information that is accurate only as of the date of this broadcast, November 7, 2023.

Cricut assumes no obligation to update any forward-looking projection that may be made in today’s release or call. I will now turn the call over to Ashish.

Ashish Arora: Thank you, Jim. Q3 was strong from a profitability perspective, with operating income up 36% year-over-year despite a 1% sales decline. As we mentioned before, in 2023, we are focused on profitability and remain disciplined in our investments to generate value over time. We view our business through a long-term lens and these investments will help us return to meaningful sales growth in the future. We continue to see retailers taking a conservative view with open-to-buy dollars and consumers being careful with discretionary spend, especially on higher ticket items. As the category leader, we are focused on the things that we can control. We continue to innovate and grow interest in the category, which will ultimately drive customer acquisition.

We are excited about the future of our platform and the opportunities ahead. Before going into updates on our key priorities, I want to highlight some exciting new product launches in Q3 that demonstrate our commitment to innovation. First, Joy Xtra, we launched Cricut Joy Xtra in Q3. It was available for purchase starting on September 7th. Targeted primarily at new creative users and broadening our market with a printer-friendly compatible format, Cricut Joy Xtra is designed to help makers create the most popular projects, especially full-color stickers, as well as custom cards, t-shirts and much more, yet is compact enough to fit into any space. Second, Cricut Venture, on the last earnings call, I mentioned we launched Cricut Venture, which became available for purchase on July 25th.

Cricut Venture is the largest and fastest connected cutting machine on the Cricut platform and represents the fourth all-new architecture of connected machines in our history. The feedback from our users and independent reviewers on both machines has been very positive. Now on to an update on our priorities. Recall that we have four priorities, new user acquisition, user engagement, subscriptions, and Accessories and Materials. I will briefly review these items and provide some detailed commentary on our new platform innovations. New user acquisition, we ended the quarter with 8.6 million total users, approximately in line with our expectations. We continue our focus on new user acquisition to grow our member base engaging on our platform, which ultimately drives our monetization flywheel.

We have previously shared that our funnel is healthy and we see an opportunity in holiday to pull consumers through the funnel who have been pausing in their purchase decisions. We are encouraged by recent Amazon Prime Day results that appear to confirm our research that consumers looking for a deal will act for the right value. As discussed last quarter, we are continuing our plan for deeper, shorter-lived promotions during holiday to convert more of these consumers. As we enter Q4, we continue to focus on driving awareness for Cricut and our category by driving excitement by getting people talking about and making with Cricut, with friends and family and across social media. We know that Cricut is a key part of holiday season for makers across the globe.

We plan to position Cricut as the key buy or gift of the season, from supporting sales promotions to executing holiday marketing campaigns that bridge awareness to revenue. Turning to the international side of our business, we are excited to see a return to sequential and year-over-year revenue growth, up 36% year-on-year, with international representing 21.5% of total company revenue in the quarter compared to 15.6% in Q3 2022. We ended the quarter with 3.64 million engaged users, compared to 3.56 million a year ago. As a reminder, we count an engaged user as one who cuts a project at least once a quarter. Engagement embodies the core of our platform where we help users discover, make and share their projects. Our goal is to expand the breadth of makeable content and help users discover content that inspires them.

We then want to make it easy for them to design and make their project and ultimately share on the platform for others to be inspired. Although we are still in the early days of executing on our engagement strategy, we see several positive signs resulting from our efforts to drive engagement throughout our member’s journeys on our platform. Let me share a few examples of what we are working on. A key onboarding metric we look at is the number of days new members cut within their first 30 days after registering their machines. This metric is a strong leading indicator of the long-term engagement of a member on our platform. Over the past year, we have mentioned initiatives such as Cricut Learn classes, assisted learning plans and other improvements in our out-of-box experience.

In Q3, we saw an increase in this key on-boarding metric compared to a year ago, as well as the share of members who engage in our educational content. Content plays a key role on our platform. We have been focused on delivering depth and breadth of images. We have now crossed 600k images available to our Cricut Access members. The growth of our library over the past year has been possible thanks to the great success of our Contributing Artists Program. We are also making strides in the discoverability of our content, so members can increasingly find content that is relevant to them. In Q3, we launched personalized content on the Design Space homepage, where each member gets recommendations based on their past activities on our platform. Before, all users in each country saw exactly the same content.

We are pleased with the click-through-rates of members with this new, personalized content. We will continue to invest in personalization, along with growing our Cricut library of images. A unique differentiator of our platform is projects. With projects, our members can discover full project ideas that they can customize or just make them as is. Unlike inspiration found on other platforms, projects in design space are not just a visual inspiration that needs to be recreated from a blank canvas, but actual makeable content. In Q3, we also made improvements to our project search algorithm to provide better visibility to members of community projects, which are projects made and shared on our platform by other members, not created by Cricut. As a result, we saw a significant increase in the number of members deciding to make their project based on a community project.

By way of context, we see our library of community projects as a key area of growth for our platform. Community projects will increasingly be a fresh source of inspiration and makeable content for our subscribers as network effects accelerate the amount of makeable content, which in turn inspires others to discover, make and share projects. While providing more visibility to the diverse creations from our community, we are also making improvements to facilitate and stimulate project sharing. As we are successful in unlocking this opportunity, community projects will become a massive opportunity for growth and will create a competitive moat that will be hard for others to replicate. As we broaden our library of images and projects, it is important that our users are able to find the content they are looking for.

I have already talked about the personalization technologies we are investing in. In addition, we are also focused on improving search. We launched Semantic Search in early Q3 and are actively testing and optimizing it. Machine learning powers Semantic Search, we are already seeing significant search conversion gains for multi-word queries and are actively training the machine-learning model on Cricut and cutting-machine-specific terms to further improve the results. The common thread across all of our engagement efforts is to help users discover content that inspires them, and matches their skill level and time availability, so they can find fulfillment in making and sharing their creations. Paid subscribers were in-line with our expectations and increased 261,000 year-over-year, but decreased 23,000 sequentially in Q3, ending with approximately 2.7 million paid subscribers.

Recall, we communicated our expectation that paid subscribers could be flat to down in the second half of the year. While we have a positive outlook on subscriptions, lower new user adds compared to prior years puts pressure on our subscriber growth rate and attach rates throughout the second half of the year. As of today, I am pleased to say that in the month of October and thus far in November our paid subscriber count has been positive. To be clear, positive paid subscriber growth is our plan. We have a rich roadmap to continually increase the value proposition for subscribers, including an ever-growing suite of premium design tools, along with the content strategies described previously. Our goal is to make it incredibly compelling to sign up as a subscriber to leverage our software and services.

As our engagement efforts bear fruit, we expect to see a boost to subscriptions. Accessories and Materials sales declined 12% year-on-year. As we have highlighted before, we are on a two-year journey to transform this business. Consistent with prior comments, we will continue our promotional cadence in this category to remain price competitive for consumers. We see that when we are in the price range of our competitors, we get our fair share. We have a strong focus on optimizing our products for lower costs, so we can compete better in the market with improved margins, while still creating a differentiated offering that works seamlessly with our machines and platform. For example, along with the launch of Cricut Joy Xtra, we released several innovative new materials, like printable waterproof sticker sheets, iron-on and vinyl, that leverage standard inkjet printers and then work seamlessly with our print-then-cut technology to produce full-color projects in a single cut layer.

We are intensely focused on the overall customer experience and we are motivated to work with those retailers that help us create a great experience both on the shelf and for actual usage of our ecosystem. I have never felt so encouraged and excited about the Cricut platform. We are in the early days of this transformation, while remaining profitable. We are driven to continue to innovate while exhibiting both long-term focus and current discipline. As we look ahead into Q4 and beyond I am excited about the future innovations of our platform and products that will continue beyond what I detailed previously to help users discover, make and share. With that, I will turn it over to Kimball.

Kimball Shill: Thank you, Ashish, and welcome everyone. In the third quarter, we delivered revenue of $174.9 million, a 1% decline compared to prior year. We generated $17.2 million in net income, a 38% year-over-year increase and our 19th consecutive quarter of positive net income, as we continued to invest in our key priorities. Breaking revenue down further, revenue from connected machines was $49.5 million, down 6% over Q3 2022. We continued to experience the effects of softness in consumer discretionary spending and retailer caution in inventory commitments. Revenue from Accessories and Materials for the quarter was $49.1 million, down 12% over Q3 2022 and was primarily driven by a decrease in project materials. As Ashish referenced, we have more work to do here.

Subscriptions revenue for the quarter was $76.3 million, an 11% increase over Q3 2022, reflecting targeted investments in Cricut Access and the expansive improvements made over the last several quarters. In terms of geographic breakdown, international revenue was $37.6 million up 36%, compared to $27.6 million in Q3 2022. As a percentage of total revenue, international was 21.5%, compared to 15.6% of total revenue in Q3 2022. Turning to users and engagement. I am pleased to share we ended the quarter with over 8.6 million total users or 16% growth over Q3 2022. We ended the quarter with over 3.6 million engaged users, which was a 2% increase from Q3 last year and essentially flat sequentially. We ended the quarter with approximately 2.7 million paid subscribers, up 11% from Q3 2022, but down 23,000 sequentially.

Our subscription attach rate declined to 31% in Q3 2023 and from 33% last year. As discussed in earlier calls, there is some natural subscriber attrition, so, subscriber growth will be muted until we increase the pace of machine sales and new user acquisition. Moving to gross margin. Total gross margins in the third quarter was 46.8%, an improvement compared to the 46.2% in Q3 2022 and reflects a higher amount of subscription revenue as a percentage of total revenue. Breaking gross margin down further, gross margin from connected machines was 15.9%, compared to 6.1% in Q3 of last year. The increase in margin was primarily due to less promotional activity as a percentage of revenue and a favorable product mix compared to Q3 2022, as our end-of-life maker machine continues to represent a smaller percentage of machine sales.

Subscriptions gross margin for the quarter was 89.3%, compared to Q3 2022 of 90.6%. Third quarter gross margin for Accessories and Materials was 12.1%, this compares to 29.2% in Q3 2022. The decline in margin was driven primarily by inventory impairments. Without the impairments, gross margin would have been approximately 30%. Our full-year expectations for A&M margins remain unchanged. Looking into Q4 for both connected machines and Accessories and Materials, margin pressures from capitalized warehousing and operations expenses will accelerate as we reduce inventory levels. Also, Q4 is typically our lowest gross margin quarter. Machine sales are seasonally higher with the holidays, which will naturally pressure margins, since machines carry lower gross margins than other products and will represent a higher percentage of revenue in that quarter.

Total operating expense for the quarter was $58.2 million and included $11.7 million in stock-based compensation. Total operating expense was down nearly 10% from $64.4 million in Q3 2022. The $6.2 million decrease in total operating expense included a $4.5 million reduction in bad debt allowance. Operating income for the quarter was $23.7 million, or 13.5% of revenue, compared to $17.4 million, or 9.8% of revenue in Q3 last year. Our tax rate of 32.5% was higher than normal, compared to 29.5% in Q3 last year, due to an increase in stock-based compensation difference due to the decrease in stock price upon vesting versus the stock price at the grant date. We delivered our 19th consecutive quarter of positive net income. Net income was $17.2 million, or $0.08 per diluted share, compared to $12.4 million or $0.06 per diluted share in Q3 2022.

Turning now to balance sheet and cash flow. We continue to generate healthy cash flow on an annual basis, which funds inventory needs and investments for long-term growth. Year-to-date, we have generated $196 million in cash from operations, compared to $630 thousand a year ago, ending with a cash and cash equivalents balance of $173.6 million. We remain debt free. Recall, we are generating higher levels of cash as we work to bring inventory more in line with pre-pandemic norms. Accordingly, inventory decreased by $180.2 million from a year ago to $303.6 million at the end of quarter. In Q2, we announced a $234.6 million special shareholder dividend, of which $232.2 million was distributed in July, with the remainder to be paid upon vesting of restricted shares.

During the quarter, we used $347,000 of cash to repurchase 39,000 shares of our stock. We have $26.9 million remaining in the repurchase program as of the end of Q3. After the end of the quarter and through October 31st we used $6.9 million of cash to repurchase 821,000 shares of our stock which results in $20 million remaining in the repurchase program as of November 1st. Much of our outlook remains consistent with what I communicated in our prior earnings call, but I do want to highlight a few additional items. During Q3 and specifically in July, we paid the special dividend, which will result in a lower cash balance and lower interest income in the second half of the year. We expect to continue generating healthy cash flow from operations and to end the year with substantial cash and no debt.

Consistent with our commentary last quarter, we continue to see softening in consumer spend in our category and retailers taking a conservative approach to inventory commitments. Retailers did not restock to historical normal levels in Q3. As a result, we are taking a prudent and prioritized approach in our planning as we look ahead. Leveraging our consumer analytics, we plan to execute deeper Q4 promotions for machines, combined with comprehensive marketing plans, to address consumer concerns about affordability and consumer reluctance to spend. We remain cautious because it is difficult to predict how consumers and retailers will respond to these initiatives. Typical revenue seasonality is 60% in the second half. Given the current macro environment, we expect second half revenue to be softer as a percentage of full year revenues and expect a lower sequential growth rate in Q4 compared to historical norms.

In terms of new user growth, we still expect to add fewer new users in 2023 than we did last year. We have a positive outlook on subscriptions and expect to end Q4 with more paid subscribers than we had in Q3. As we look to 2024, however, new user growth rates may put pressure on our subscriber growth and attach rates, which could result in a similar seasonal subscriber pattern as we observed in 2023. Gross margins will continue to be pressured for multiple reasons. First, the mix of revenue in Q4 is more weighted toward machines, which carry lower gross margins. Second, on physical products, higher fixed costs as a percentage of revenue in warehousing and capitalized operations expense will be more pronounced in Q4 as inventory levels decrease.

Third, Accessories and Materials will also have a promotional cadence to remain price competitive. As a result, we expect full year Accessories and Materials margins will be similar to Q4 2022’s gross margin. We expect operating margins to be similar to 2022 full year margins. We remain focused on managing our profitability, while investing in areas with the highest impact. Should macro conditions worsen, we will continue to make adjustments as needed, just as we demonstrated in 2022. We expect to continue generating healthy cash flow from operations and remain committed to our long-term operating margin targets of 15% to 19%. Our proven model has demonstrated that when we operate at scale and drive topline growth, these margins are achievable.

With that, I will turn the call over to the Operator for questions.

See also 12 Best Crude Oil Stocks To Buy As Tensions Rise and 20 Most Valuable Fast Food Companies in the World.

Q&A Session

Operator: Thank you. [Operator Instructions] Our first question comes from Erik Woodring at Morgan Stanley. Please go ahead.

Maya Neuman: Hi. Thank you. This is Maya on for Eric. First question, just as we look at the percentage of engaged users, it dropped to a new low of 42% in the quarter. Where do you think engagement bottoms and how should we think about that metric in 4Q? I know it’s usually obviously a seasonal uptick. And then I have a follow-up. Thank you.

Ashish Arora: Maya, thanks. This is Ashish. Let me take that and thanks for the question. Clearly, engagement as we have highlighted before, is one of the top priorities for the company and we definitely have seen some promising results and promising thing but too early to declare victory. So let me kind of give you some color on that and hopefully we will answer your question as well. So as you said, percentages are down year-on-year for engagement, but the number of engaged users were up by about 80,000, driven mostly by the fact that we have a larger number of users, but the number of engaged users were up 80,000. Now when we ask, when we dug into this and when we asked users who have not been on the platform for the last 90 days or more, they kind of highlight a number of thing.

But the first thing they highlighted is that over 80% of them actually want to be on the Cricut platform. They like it, they want to engage with Cricut more. So then we ask them well, why didn’t you do that. And the top reasons among many, one is life just got too busy, I didn’t have time, I couldn’t think of a reason to make something and even if I had a reason, I couldn’t find a project easily. So what we are focusing on basically to capitalize on the opportunity we have in engagement is to innovate on the platform, to make it easier for them to make things so that it takes less time to send them triggers and identified reasons that they want to come back to the platform, like for example, reminding them say, hey, you have — you made for birthday last year, it’s time to make a birthday project or a friend that you follow on the platform made something.

And finally just give them the right inspiration and the right content so that they can make it. So a lot of innovations and I think it’s a series of things that we are doing. But let me give you an example that we kind of highlighted in our script. So we introduced this personalization driven which identifies based on user’s interest, things that they would be interested in and we saw a pretty significant engagement with that content, right? So, again, we are going to continue to work on a variety of initiatives. All of these, many of these are showing promising signs, but obviously, they have to at some point add up to impact the overall metric that we report on publicly. One thing that we do want to highlight is that, our conviction and our belief is that the more people come back to the platform, more often to be inspired to be discovered — to discover content, the more likely they will be to make.

So, again, like I said, some good promising results on the micro initiatives, but we have to still see how they all add up to improve the metric overall.

Maya Neuman: Great. Thank you. And then you talked a little bit about how retailers continue to be cautious in 3Q. As you look into October and November to-date, kind of, are you starting to see retailer’s restock more significantly or is it kind of that same cautious retailer behavior?

Kimball Shill: So, Maya, this is Kimball. Thanks for the question. We are seeing retailers continue to be cautious as we move into Q4. We also continue to see consumers and the discretionary spend under pressure. That said, we have a large SAM with a huge opportunity in front of us, notwithstanding some of the headwinds. Our research shows us that the funnel is healthy and we have a promotional strategy in Q4 that we have talked about where we are going to have some deeper shorter life promotions to accelerate some of those consumers through the funnel that tell us that they are waiting for a deal or they are saving money to buy a Cricut. We saw the recent Prime Day performance we are encouraged by that. But it’s still a little early for us to say how holiday works out for consumer demand. We are — so we are watching that very carefully. But in some instances, we believe retailers have sub optimized inventory purchases for holiday.

Ashish Arora: And let me just kind of add to that and reinforce some of the things that Kimball mentioned, right, which is that, we made a deliberate strategy for the majority of the year based on the headwinds we are seeing to build the top of funnel and the middle of funnel. So, as we kind of continue to pull people through the funnel right before the convert, they basically highlight a few different reasons why they haven’t hit the purchase button, which is I am saving money, I am looking for a special deal, I am worried about expenses. So our Q4 strategy as Kimball said was very much driven by let’s promote and let’s understand the elasticity of those promotions. We think, we clearly saw the results on Prime Day, we definitely have working with retailers to highlight some of our concerns, we think that there will be some money or some money left on the table as these consumers either buy something else or go online to purchase these products, but again we go into the holidays, basically based on data that some consumers will actually respond to the promotions that we are actually pretty excited about it.

Maya Neuman: Great. Thank you so much.

Operator: One moment for our next question. Our next question comes from Adrienne Yih at Barclays. Your line is open.

Paul Kearney: Hey. Good evening. It’s Paul Kearney on for Adrienne. I wanted to just drill down on Accessories and Materials. On the gross margin performance, hoping you can give us some more color on what’s driving the year-over-year decline in gross margin, it’s down to 12%. I know there was, how much of this was the excess inventory reserve versus kind of just deleverage on higher fixed costs and then bigger picture on Accessories and Materials. How do we get back to a point where Accessories and Materials the gross margin contribution becomes a larger part of the story, the razor blade part of the story or the — when things are working? Do you see anything different on kind of Accessories and Materials getting back to that point? Thanks.

Kimball Shill: Paul, this is Kimball. Thanks for the question. First, your question on gross margins. So Accessories and Materials gross margins in the quarter would have been 30%, but for the write-downs, all right? And A&M is our broadest category and as a category, we received the most competition and we launched a lot of products in that category and some do well, some don’t do as well and as we look at velocity and do periodic look backs, GAAP requires that we write down excess inventory. As we have kind of gone through the last couple of years and had declining sales in this category, that has exacerbated somewhat that velocity factors as we do these look backs and so that’s, that’s really what weighed down the margins this year in the quarter.

On the revenue side of the equation, we do see competition here, but as Ashish mentioned that, when we are closer to price with our competitors, we win our fair share, and so we are focused on how we maintain share in this, in this space. Engagement continues to be a headwind, because when consumers are cutting less they are using fewer materials and that puts pressure on their demand. And then, again there is an element of the reach of a conservative approach to restocking inventory that also is weighing on our revenues currently. We are about eight months into a two-year journey to remake this business. I just want to highlight that you know, we have a strong conviction that we have a right to play and win in this space. We have an integrated platform and we have done materials work seamlessly with our platform.

And as we rebuild this business over the next coming quarters, right? We are focused on making sure we have the right products at the right price with the right cost structure, so that we can win and also help our retailers with their margins also.

Ashish Arora: And then I will just add that as we drive engagement, that’s the more structural variable that lift all boats and I think we need to just make sure that we continue to do that over time.

Kimball Shill: Yeah. And I would just call out that, these improvements aren’t going to be like a light switch, right? You will see incremental improvement over time.

Paul Kearney: Perfect. Thanks, I will pass on.

Operator: One moment for our next question. Our next question comes from Mark Altschwager at Baird. Please go ahead. If your line is muted, please unmute it. Please rejoin the conference call, if you can’t hear. Our next question comes from Mark Altschwager at Baird.

Amy Teske: Can you hear me now?

Operator: Yes.

Ashish Arora: Yes. Yes. Can here you.

Amy Teske: All right. This is Amy on for Mark. So thank you for taking our questions. You noted in your prepared remarks that subscriber growth and attach rate could remain under pressure in 2024. So at this point, can you provide us any more color on your initial expectations for 2024?

Kimball Shill: So, I will talk to the subscriber piece for our strategy. We called out this year we are adding fewer new users than we did last year and at our current rate of adding new users we saw that and when we talk to this in Q2 and then this quarter that at the current rate of new user adds that we could be flattish to slight decline on subscribers. And to the extent that growth rates in new user acquisition is moderate, we would see this — we would expect to see the same seasonal pressure next year, which means that would be expected to add subscribers in Q1 and Q2, and potentially flat to maybe down in Q3 depending on exactly how those new user acquisitions play out. In terms of Q 2024, oh, sorry, in terms of 2024 outlook, I think, it’s a little early for us to call that out and we have talked about the headwinds that we are seeing currently in Q4.

We have talked about the promotions that we have planned and we are watching those closely to see what resonates with consumers and what elasticity, we see as we go through those promotions and that’s really going to inform us as we think about especially the first half of 2024.

Ashish Arora: And again, I think, if you look at all the 4 priorities that we have, subscriptions, acquisition, engagement and materials, we feel that we are further in line in our subscriptions roadmap. It’s where we have a ton of innovation coming. We are focusing on driving search, improving services, content. So, we generally have a level of confidence in that part of the portfolio is high. As Kimball said, in addition to that, as we look at acquisition, right, as we acquire new members and penetrate our SAM, it does — the more we acquire, the more it helps our subscriber base. So, our ability to succeed in acquisition is going to directly have a positive impact on subscriptions in terms of acquiring new customers. Our efforts on engagement is going to have a positive impact on our ability to retain those subscribers.

So, I think, again, it’s hard to talk about how the economy is going to shape out and how some of the consumer spending will happen, but again as we look at the medium- to long-term, we have a high degree of confidence in our subscription’s roadmap and strategy.

Amy Teske: Right. Thank you. And then this year you continue to expand the capabilities of your subscription platform while introducing new cutting capabilities with the Joy Xtra Venture machine. Was there any sell-in benefit in the quarter related to that Joy Xtra launch and then could you also speak to any particular areas of opportunity you see in the innovation pipeline? Thank you.

Kimball Shill: So there were some selling benefit in the quarter, but not enough that we are splitting separately. It’s still in distribution and being placed in retailers. So it’s not fully set in all locations where we expect to see it.

Ashish Arora: It’s actually very late in the quarter, right, when we launched Xtra. So, again, we are just kind of rolling out, we have had really, really strong reviews, great feedback from our existing and our new consumers. For Venture just to add to your question, we obviously did not see any sell-in benefit. So there is no artificial pull-in of revenue, I would say, for Venture, because it’s only distributed online. So sell through revenues match pretty well. I think our innovation strategy is to kind of continue to drive for affordability and approachability on machines, on materials. But again, I would reinforce the biggest innovation that’s going to benefit and ultimately helps us cross the chasm is going to be all the efforts that we are working on the platform to drive engagement and to make it easy for people to discover, make and share their projects so that it ultimately drives network effects.

I think that’s kind of, there’s a lot of innovations coming, but that is the core backbone of how all innovations will play off each other.

Amy Teske: Great. Thank you.

Operator: One moment for our next question. Our next question our next question comes from Asiya Merchant at Citigroup. Your line is open.

Asiya Merchant: Great. Thank you for taking my question. So the international growth was particularly strong and you highlighted that in your prepared remarks as well. Maybe you can talk to visit about, is it just off a small base or what’s been some of the driving factors that you see on the international front and how we should think about sales and marketing expenses in the December quarter as you continue to drive maybe perhaps the international growth or even domestically if you have talked about your various initiatives. And then I have a follow-up. Thank you.

Kimball Shill: Okay. Asiya, thanks for the question. This is Kimball. Yeah. We are excited about our international performance. We are up 36% year-over-year and that represents almost 22% of revenue in the quarter, which is up from a year ago. International benefited from retailer expansion within different countries as also online expansion. That said, we are excited about our SAM both in North America and internationally. We have a huge opportunity in front of us and while we benefited relatively in international in the last quarter we said, we have a huge opportunity ahead of us in our domestic business as well. Turning to your question on marketing spend in Q4, as part of the deeper promotional strategy, we have talked about being able to create buzz around some of those promotions and adding number of influencers.

I think we have shared the number of targeting additional 200 influence to help us — influencers to have us advertise our promotions and our product. We have added almost 300 at this point and we continue to execute on that broader marketing strategy in the quarter.

Asiya Merchant: Okay. And then just on the cash flow generation, obviously, very healthy here. Can you talk to us about the return of cash in this one like what we should be modeling for the outer quarters? It seems like the repurchase of shares was a little bit lower this quarter than the prior quarters. Are we expecting more of this to continue given the — given you guys have a balance still remaining in your share buyback? Thank you.

Kimball Shill: So we have a business that generates cash and we have talked about in the last couple of quarters that we are generating more cash this year than we normally would as we bring pandemic level of finished goods inventories down in line with historical norms and so we highlighted almost $200 million worth of cash generated this year versus quarter-to-date versus $600 and something thousand the prior year. So we are producing a lot more cash and the $234 million dividend that we paid in Q3 reflected a rightsizing of our balance sheet. And we continue active with our buyback program. We buy within, outside of our open trading windows. We are trading within kind of Safe Harbor provisions for volume, but we also have price targets at which we are more active versus less active and so that’s part of what played into the Q3 purchases.

As we highlighted in the month of October, we also spent $6.9 million to purchase an additional 821,000 shares. So we will be active in the buyback, but we have a pricing strategy that we adjust from time-to-time.

Asiya Merchant: Okay. Thank you.

Operator: Thank you. I would now like to turn it back to Jim Suva for closing remarks.

Jim Suva: Thank you, Amber, and thank you everyone for joining us this afternoon. We have a large opportunity over the long-term to drive new user growth and increased engagement. We believe the initiatives we are deploying now will position us well in the future. The Cricut platform continues to not only strengthen but also provide increased value to our users. We will continue to manage the business for sustainable, profitable growth and generate healthy cash flows. I am excited about the opportunities ahead of us. We will be at the ROTH MKM 12th Annual Deer Valley Investor Conference in Deer Valley, Utah on December 14th and look forward to seeing everyone then. If you have additional questions, please email me at jsuva@cricut.com. This now concludes these earnings call and you may disconnect. Thank you.